Your cart is currently empty
Product image slideshow Items
Turn your mSATA SSD into an external hard drive by using this high-quality, aluminum mSATA housing. Supports UASP/Plug & Play, TRIM and is suitable for drives up to 2TB.
If your laptop has an mSATA drive, you can use it externally with the mSATA housing from Orico. Save your hard drive from the outdated laptop, save energy and go for a sustainable solution. Use your mSATA SSD drive as an external hard drive by using this aluminum housing. The mSATA housing supports SSD drives with a maximum capacity of 2TB.
Thanks to the USB 3.0 technology and the support of both SATA 2.0 and SATA 3.0, you can achieve transfer speeds of up to 5Gbps with this housing.
The aluminum mSATA housing is equipped with a direct USB connection. This allows you to easily and quickly insert it into the USB 3.0 port without the need for a data cable or power cord. Prevent cables from getting tangled with this mSATA housing.
The aluminum mSATA hard drive housing from Orico supports Hot Swap, Plug&Play, UASP, SATA 2.0 and SATA 3.0. This housing is therefore easy to plug in and out without having to restart the computer. In addition, the UASP protocol significantly increases the write and read speed and extends the service life. In addition to all this, the case also supports the TRIM instruction: this ensures that the SSD is optimized and space can be reserved for new data.
With a weight of only 40 grams and a thickness of 11 mm, this external hard drive is easy to take with you wherever you go. Place it in the laptop bag, a pocket of a backpack or even in your pocket: it will fit anywhere.
By placing your SSD drive in this mSATA housing, you can be sure that your SSD is protected. The housing is made of high-quality aluminum, which means that the risk of damage is very small. In addition, the aluminum housing ensures good heat conduction. The housing has rounded corners, so there will be no sharp edges.
Installing your own SSD drive in the mSATA housing is no effort at all. Open the front panel with the supplied screwdriver and remove the printed circuit board from the housing. Click the SSD into the mSATA housing and slide the PCB back into the housing. Tighten the screws and the disc is ready to use.
Product specifications:
✔ Product type: mSATA housing.
✔ Item code: ORI-MSG-U3-SV
✔ Suitable for mSATA disk with a capacity up to 2TB.
✔ Material: aluminum and ABS.
✔ Supports: UASP, plug & play, TRIM instruction.
✔ Direct USB connection.
✔ No data or power cable required.
✔ Durable design.
✔ Installation with supplied screws/screwdriver.
✔ Supports: Windows, Linux, Mac OS.
✔ Color: silver.
✔ Weight: 40 grams.
✔ Product Dimensions: 88mm x 44mm x 11mm.